Wednesday, November 5, 2014

S100 Wince firmware flash and recovery method using SDBOOT

The SDBOOT recovery is not the normal firmware upgrade for wince units, this is intended to be the procedure:

- to recover your s100 unit after a bad fw flash
- to switch back to wince an S100 unit previously converted to android(only if running firmware till 06/06/2014 or a 2.34 fw)

- to convert an S150 android  unit to wince (only if running firmware till 06/06/2014 or a 2.34 fw)

First you need a firmware for your unit, possibly the original one made just for your cxxx unit.
If you don't have the original firmware you can adapt another unit firmware using this tool: SetUpdateXML_EN_2.exe (this is the version for newer 1.x.9 serie of fw)


Simply put the exe in the same folder where you have extracted the fw files and run it; select your model and hit ok.
Anyway your fw will not be safe enought until you find the correct MCU.bin for your unit, so i recommend to use always an MCU that you know it work ok for you.

Second you need this package: SDBOOT_wince.zip and a possibly new SD card (2-4Gb).
If you don't have a new SD i suggest you to use the mini tool partitionwizard to fully erase all the partitions you could have created using sd-flasher or other tools.
Once you have a clean SD card you can format it in fat32 using the sdformatter app included in the sdboot archive and label it "SDBOOT" (this is important!):


Now use “SDBOOT.exe” to write image into SD card selecting the SDBOOT_bootimage.nb0 included in the zip and press START:



The fuse process will take just a second, when it's done you can safely remove the SD card ejecting it from Windows, remove it and reinsert it again.

At this point Windows will ask you to format the sd, do it selecting quick format fat32.

Now you have a  wince recovery card where to copy your original firmware on it; a tipical Winca\Roadnav firmware contain this files and folder structure:
-BTUpdate\
-image\
-MCU_FLASH
-Patch\
-S100PROGRAM\
-update.xml

Copy these files on the root of the SD
Be sure you have removed all usb devices you have on the unit, eject the CD, go to Bluetooth section and disconnect all the devices.
Power off the unit
Insert the SD it in the gps slot and power on the unit.
The process will start....

Here is a sample video of the update procedure:

Don't touch anything until the process ends.
At the end you'll have a window that will ask you to remove the card and the unit will reboot:



That's all for now, rememeber if you like my work to hit the donate button.


256 comments:

  1. Please, I installed androi my s100 and now I want to go back to WINCE but I can not with this tutorial you posted. The screen goes black and nothing appears. You know what it could be?

    ReplyDelete
  2. I did exactly as in your tutorial.
    Androi is still running, but it is with some bugs ...
    I installed the original firmware android.

    ReplyDelete
    Replies
    1. which android firmware have you now? what date?

      Delete
    2. Firmware: I001_4.0_20140702
      .
      I think I know why it did not work.
      My SD card is corrupted, and according to your tutorial, the card needs to be new right?

      Delete
    3. I still have two more doubts about the process:
      .
      1- After recording the SDBOOT_bootimage.nb0 on the card, you say to eject it and reinstall it, and after that format the card. But if I format the card data (SDBOOT_bootimage.nb0) will not be erased?
      .
      2. To start the installation of WINCE you say to "power off" the unit. Would not "power on" the unit to start?

      Delete
    4. 1. No because the nb0 is fused in a partition that windows cannot see.
      2. Power off the unit
      Insert the SD it in the gps slot and power on the unit.
      The process will start....

      If you don't have a new SD i suggest you to use the mini tool partitionwizard to fully erase all the partitions you could have created using sd-flasher or other tools.

      Delete
    5. I also suggest you to downgrade to an older android firmware like 06062014 or my 2.6 rom before flashing wince because the 0702 firmware probably won't let you see the flash process using sdboot.

      Delete
    6. Thanks man.
      My problem was the card corrupted.
      I could make the whole process of the card, but when I went to install the center, would not leave the calibration screen, so I went to the file "update" and changed the line to "true" to "false" .
      After that, I restarted the process and everything was installed correctly.
      .
      I was sad because I had really liked the android, but it was very unstable, and my device is still under warranty. When a more stable version of android I come back to install.
      .
      I could only do this because of your help, thank you. I will make a donation to your site ..

      Delete
    7. i need back to S100, now have android 4.0 is very bad. that file must be modified to "false"? pls help me

      Delete
    8. Please contact me by email.

      Delete
  3. This comment has been removed by the author.

    ReplyDelete
  4. Hi KoTix,

    unfortunately I flashed a wrong firmware/software on my C096 unit.
    I have the same problem like some others.
    White screen fading black with some colored stripes on the right.

    I flashed the following firmware that doesn't match:
    mydean-V5.7.1.4 Z0AL S00E
    ADSet / define id="279" derivativeID="0" name="C279", openLogo id="2", LCD id="5", ADFunc id="0"

    Result : Yellow screen (please see image here under) : Update NK success. Run WINCE now... I waited 30 minutes,

    and nothing was happening. So I decided to reboot the unit.

    After that I can reboot the unit, but I always get a black screen with stripes.

    I have tried to update firmware again with the SDBOOT.
    I also did the TouchExe run="false" and waited 30min.
    No success.

    My Unit is:
    C096 - S100
    ADSet / define id="96" derivativeID="0" name="C096" , openLogo id="25", LCD id="1", ADFunc id="0"

    I think it is because of the flashed wrong display setting.

    However - I have no idea how to recover.

    I am not sure if the WinCE SD Card boots in the unit because when I try it in the notebook it sais "Missing

    operating system"

    I started the flash update because of this error:
    "Application Platform.exe encountered a serious error and must be shut down"
    Before I had this firmware running with this error when booting up:
    OS Version: S100-UNI.A20140721-A2.2
    App Version: S100-V1.6.9.13
    MCU Version: TONM S00E C096

    Do you have some idea / advice?

    Cheers Weltall

    ReplyDelete
    Replies
    1. All the people who have this problem did not found a solution yet, just the replace of the cpu board seem to be the only thing to do right now.
      Other people already try all the my suggestions without success.
      Whenever anybody will find a solutions I'll surely post here.
      Cheers :)

      Delete
    2. Please check if in update.xml is set: LCD id="1"

      Delete
    3. Saw this post and have seen that MyDean skin is a little fancier, and would like to update to MyDean.
      But it does not seem possible.
      Is there any difference in hardware between Winca S100 and S100 MyDean?

      Delete
  5. This comment has been removed by the author.

    ReplyDelete
  6. I checked this.
    The radio always boots to a tuner mode.
    I see the radio station in my boardcomputer.
    I can use all steering wheel controls. (volume + change frequence)
    Even my mobile phone is connected via bluetooth to the unit.

    But the display is black with the colored stripes on the right.

    If I boot the unit normal with the BOOT SD in the GPS slot - it is booting to the tuner anyway.
    If I boot the unit with SRC key pushed while resetting - it beeps and the display stays white with some colored stripes. In this mode there is no steering wheelt control and no button works.
    But I think even in this mode there is no firmware update done.
    It's very difficult without a display.

    Do you have any idea?
    Can I flash the unit in another way? Maybe via USB?
    Can I install another monitor/display on the back end cinch video out?
    Should the SDBOOT SD boot in my notebook? Because it does not. It sais "Missing operation system"

    I have got a C096 unit.

    ReplyDelete
    Replies
    1. Did you try to flash android instead?
      you can find the android firmware for your unt on roadnav.com and you should follow the guide here:
      http://kotixworld.blogspot.it/2014/01/s100-to-s150-conversion-convert-wince.html

      Delete
    2. Yes, i tried this too, now.
      Thanks for the idea.
      Unfortunately no change :(

      Delete
    3. Hello,
      i have the same/similar problem.

      I have install Kotix Android - latest version 2.6 from 24 June. Maybe i've tried install new version without boot, but with no success.
      With the same reason as Kotix I decided turning back i buy excellent skins from Kotix, but booting has crashed.

      Everything seems normal, until rebooting and loading WINCE. I see logo, after several seconds few beeps and logo delicate blinks and turns on radio station, but still is logo on the screen, without the system. Buttons are not lighting without src.
      I've tried boot it again, I've downloaded newest version of firmware - the same result.

      Please help, wife just gonna kill me...

      My firmwares:
      Date: Mar 25, 2015
      File Name: C035-V1.10.9.0.exe 74.5 MB total
      Download link: http://we.tl/jqvRWbpVSr
      RN model: C035
      OS: S100-UNI.A20140721-A2.2
      APP: S100-V1.10.9.0
      MCU: G00P S00I

      --------------------

      Date: November 11, 2014
      File Name: C035.zip 79.6 MB total
      Download link: http://we.tl/tZFLkMWsvP
      RN model: C035
      OS: S100-UNI.A20140721-A2.2
      APP: S100-V1.7.9.0
      MCU: P00N S00E

      I've noticed, that in a ADSet.xml my screen type is "5", but in update.xml - "2". Is it connected? Should I tried change this?

      Delete
    4. You should not chanfwt lcd type if you are using original firmware.
      Please sende an email so we can discuss this better.

      Delete
  7. HI,
    I have the same trouble C097 unit

    ReplyDelete
  8. How can I check if I made the Boot SD correctly?
    Should it boot in a normal PC/Notebook?

    ReplyDelete
    Replies
    1. No, it won't boot on a pc. If sdflasher after you hit the fuse button says "1 succeed, 0 failed" means it's ok.
      Anyway i got a tip from a russian guy who told me to try to flash android 2.34 and check if it give you back a particular error, if it does mean that you have to replace a flash chip on the cpu board (need a special tool for it) or replace the enitre board. it's up to you to try this last option or not but my guess at the end is that you need a new cpu board. :(

      Delete
  9. Ok - where can I find the 2.34 android software?
    How can I check if it gives me back a particular error without a display?

    ReplyDelete
    Replies
    1. maybe using the 2.34 bootloader it will show something, this is the message i had from russia:
      We need to do the test.
      Making a bootable sd card for android 2.3.4
      Card no more than 4GB.
      Is transferred to the card any firmware android 2.3.4
      Inserted in the GPS slot, turn the unit on.
      Should start flashing.
      Not important S100 or S150.
      If the firmware is, as usual, then wait for the end.
      If this device S100 after that flashed android 4.0.3
      Accordingly, prepare a bootable sd card for android 4.0.3
      If at the beginning of the firmware returns an error
      Unable to mount /cash....
      Needs to be replaced "Nand Flash"
      Or replace the screen board
      Name of the chip to be replaced "KLM4G1FE3B-B001"
      It is situated on the screen board
      Inside the iron hull.
      Can replace it. interpretation specialist.
      ----------
      boot sd card android 2.3.4 firmware
      You can identify the problem

      Can't help more then this...

      Delete
  10. That was a great idea.

    I used the manual and files found here:
    http://forum.xda-developers.com/showthread.php?t=2503964

    And... it booted from the SD and showed an android bot logo.

    The error is:
    E:failed to mount /cache (No such file or directory)
    E:Can't mount /cache/recovery/upgrade_cmd
    E:failed to mount /sdcard (No such file or directory)

    -- Install /sdcard ...
    E:failed to mount /sdcard (No such file or directory)
    E:Can't mount /sdcard/update_sd.zip
    Installation aborted.
    Upgrade error. try again !!!

    The crazy thing is - when I remove the SD card - there is no more partition on the card.
    If I want to reproduce the error I have to prepare the card again.

    Any idea what is happening?

    ReplyDelete
    Replies
    1. According to the russian guy, the nandflash chip is broken and need to be replaced:
      Needs to be replaced "Nand Flash"
      Or replace the screen board
      Name of the chip to be replaced "KLM4G1FE3B-B001"
      It is situated on the screen board

      Man you need to buy a new cpu board :(

      Delete
  11. This comment has been removed by the author.

    ReplyDelete
  12. This comment has been removed by the author.

    ReplyDelete
  13. This comment has been removed by the author.

    ReplyDelete
  14. This comment has been removed by the author.

    ReplyDelete
  15. ok - is it sure my unit has got exactly this chip?
    Have all S100 the same Nand Flash Chip?
    I have got a C096 - S100.
    http://www.cardct.com/roadnav-s100-mercedes-benz-slk-class-dvd-gps-c096

    Do I have to programm the chip after the change?
    Is it difficult to change?
    Do you have any experience about this?
    Do you know where to get the chip or the board from?

    Some people tell me it's also possible to flash/repair the chip via jtag interface.
    Is that right?

    Sorry - so many questions :)

    ReplyDelete
  16. Yes, I know you can use jtag, but don't ask me where to connect it and how to do it.
    I don't think you can solder the chip with iron solder, the pins are under the chip, you'll need a professional tool to do it.
    The easyest thing is to replace the cpu board (100usd)

    ReplyDelete
  17. Do you have any contact for buying a cpu board prefered in the EU?

    ReplyDelete
    Replies
    1. Not in europe. I bought it from carnaviplayer but many other sell them (witson, timeless, etc..)
      Just try mail them for a price.

      Goodluck :)

      Delete
  18. boa tarde amigo preciso do firmware original s 100 wince do c4 pallas por favor se voce tiver eu agradeço muito ok.um abraçao

    ReplyDelete
  19. Hi KoTIX, will be who can provide the current firmware with my specs?

    Firmware s100 for HB20.

    OS: S100-UNI.A20140106-B2.1
    APP: S100-APP-V1.3.9.7
    MCU:Z60L S00E C239
    DVD:3255 V100 7706
    BT: 20121204
    OEM info: A018
    Based on WinCE 6.0

    ReplyDelete
  20. Hi KoTiX, I did a firmware upgrade on my s156 from V 1.9.6.0 to the latest V 1.7.9.0. This upgrade failed and I want to go back to my previous firmware, however, I do not have this firmware (V 1.9.6.0); it came with the unit. What should I do now ?

    Thanks.

    ReplyDelete
    Replies
    1. What do you mean by failed? What is happened?

      Delete
    2. Did you use the original fw from here?
      http://www.roadnav.com/forum/firmware-aa/s100-wince/4710-rn-s100-wince-firmware-update/page4

      Delete
    3. Hi Kotix,
      Do you think that one can update S100 V1.9.6.0 MCU/Flash: 000B S005 using the latest version 1.7.9.0 MCU/Flash: P00N S00E ?

      Thanks

      Delete
  21. After restart the screen remains black, however I can hear the radio playing.

    ReplyDelete
  22. Hi Anonymous,
    maybe when extracting .zip files of the new fw, you used Windows unzip that provides ASCII characters instead of Chinese characters in the names of folders and files.
    Try to unzip with another software (like winrar...).

    ReplyDelete
  23. Hi,
    I bought a new winca s100 for ford focus which comes with MCU: H00L S00E and APP: S100-V1.2.9.0.
    i asked the guys from rodnav to send me the s100 firmware for my model and they sent one with MCU: P00N S00E and APP: S100-V1.7.9.0.
    Results after downgrading from s150 (since i tried this android upgrade and didnt like it) : Buttons not answering and the radio keep searching for new frequencies :S.
    Is it normal to have different MCU for the exact same model of the S100 ??
    Thank you.

    ReplyDelete
    Replies
    1. It's normal that they update the mcu with every firmware update.
      Try flashing again the firmware...

      Delete
  24. Oi quando faço todo precedimento dito e executo o exe. quando dou ok aparece escrito set the update.ini file failded. O que eu faço?

    ReplyDelete
  25. Hi KoTİX,

    My s100 for c207 info is;

    os edition: s100-uni20130412
    app edition: s100-v1.17.6.1
    mcu edition: f00d s007 c207
    dvd edition: 1227 v101
    bt edition: 20121204

    i tried to upgrade my s100 for c207 version of v1.7.9.0 which is;

    Date: November 11, 2014
    File Name: C207.zip 79.6 MB total
    Download link: http://we.tl/RJIjUHEtsL
    RN model: C207
    OS: S100-UNI.F20140721-A2.2
    APP: S100-V1.7.9.0
    MCU: U00N S00E

    But i got an error when i worked to upgrade.

    The error is:

    `the patch can not be supported in this version software or have the patch`

    What should i do for upgrade my s100?

    İ need to ur help

    Regards, Egemen..

    ReplyDelete
    Replies
    1. Read here:
      http://www.roadnav.com/forum/firmware-aa/s100-wince/94-s100-firmware-update-instruction

      Delete
  26. I applied all of it. I copied all of the files to micro sd card and powered off the unit and opened again but there is nothing happened. It is start normally as everytime

    ReplyDelete
    Replies
    1. Hi Egemen, Hi Kotix,
      It's very intersting to know what happened when one update V1.x.6.x to V1.7.9.1 ??
      is it a chinese characters problem ?
      or there is a problem with the old fw V1.x.6.x ?

      Let us know your news please.

      Thanks

      Delete
  27. Hİ Josy and Kotix . I succeed to upgrade finally :) i tried again without patch upgrade that u wrote and its completed. Now im using the 1.7.9.0 version. Thanks for help.

    ReplyDelete
  28. Hello Kotix , I have Aikon 6200 Universal unit, with wince 6 (nwd-2450, arm1136-jfs ... by wince) , only one problem, access youtube by opera mini, flash options not Works. Can you tell me if flash resolves, or is there another option? thanks JJ

    ReplyDelete
    Replies
    1. Aikon 6200 is not an S100 unit. it's a different brand and model. you can't do any of the things written on my blog.

      Delete
  29. ciao, mi puoi aiutare a trovare il firmware C361 ?

    ReplyDelete
  30. Hi KoTiX
    I want to downgrate my S150 from Android 2.3 to the new wince, it's a BMW E46 but I can't find any wince Firmware for it C052 :( will it work if I use C001 and use the tool to convert it? but what about the MCU can I use the one in the Android folder? or does the tool adapt this aswell?
    Thanks for any help and keep up the good work :D

    ReplyDelete
    Replies
    1. Look here:
      http://www.roadnav.com/forum/firmware-aa/s100-wince/4710-rn-s100-wince-firmware-update?p=9134#post9134
      ask the password in the forum. Don't mess with the config tool and read the update instructions before flashing, be sure you see the chinese characters in files and folders of the firmware.

      Delete
  31. Thanks KoTiX,
    if all goes well I'll be buying some skin packs :D

    ReplyDelete
  32. Hi,

    I had the latest version of Android on my unit and I tried this process to go back to wince.

    After putting prepared card in the sdslot, I now just have black screen and will not work. Even if I take card out. I even tried the sdboot process again on a new card and still nothing.


    What do you recommend? Do you think the latest android has issues with sdboot process? I also tried to put all the android recovery files on the card and it dosnt find recovery or do anything.

    Thanks

    ReplyDelete
    Replies
    1. Last time I moved from android to wince I had the 06/06 4.03 firmware, so i really can't tell if sdboot now have problems with newer firmwares.
      I know you cannot convert wince to andorid anymore and maybe they have blocked the reverse too.
      Please send me an email so i can give another bootloader to try out.

      Delete
  33. Hi,

    I had the latest version of Android on my unit and I tried this process to go back to wince.

    After putting prepared card in the sdslot, I now just have black screen and will not work. Even if I take card out. I even tried the sdboot process again on a new card and still nothing.


    What do you recommend? Do you think the latest android has issues with sdboot process? I also tried to put all the android recovery files on the card and it dosnt find recovery or do anything.

    Thanks

    ReplyDelete
  34. Hello KoTIX,

    I have the latest version of Android 20141011 on my S150 and I tried to go to wince. After putting the prepared sdcard in the gps slot, I only had a black screen and nothing will work. Even if I take card out. I even tried the sdboot process again with a new sdcard and still nothing. I get in contact with my dealer located in UK. They told me that there will be no possibility to downgrade or to change from android to ce. tried also the SD-Flasher from carnaviplayer.com, with no result. Only your S150 4.03 KoTiX_v2.7 works, S150 4.03 KoTiX_v2.6 not. astonishing is that my dealer offers the s150 with android or ce.

    Do you have any suggestion how to change from android to ce?

    Thanks for your help and with best regards

    ReplyDelete
  35. Hola KoTiX.

    Tengo un amigo que se compro un autoradio que trae instalado Windows CE y me pregunto si se le podria instalar Android, no tengo conocimientos en autoradios asi que despues de buscar bastante e acabado aqui.

    El caso es que tenemos el siguiente problema, mi amigo no sabe que modelo es su autoradio asi que sin ese requisito no podemos hacer mucho. Intente buscarlo en los menus de navegacion y configuracion del aparato pero no encontre nada o no supe hacerlo. Hay alguna forma de averiguar que modelo es el aparato de mi amigo y tambien se podria saber que version de Windows CE trae instalado?

    ReplyDelete
    Replies
    1. Si muestra una foto de la pantallas de la autoradio, podemos entender un poco mas.

      Delete
    2. Hola otra vez KoTiX.

      Mi amigo ha hecho las fotos por la noche asi que vienen con flash, si por lo que sea no sirven estas fotos le pedire que haga otras.
      http://subefotos.com/ver/?14f86e67c1c9b788ae89f7767900bca1o.jpg
      http://subefotos.com/ver/?4323143cbbda694d03988918597057b1o.jpg
      http://subefotos.com/ver/?32e18a299049a57178a2f41c6a0d36c4o.jpg

      Delete
    3. La autoradio no es ni una s100 y tampoco una s150, no se puede convertir a android y tampoco poner la mi skins.
      No se que autoradio es.

      Delete
    4. Hola KoTiX.

      Aunque seguimos sin conocer el modelo del autoradio, es de mucha ayuda saber que al autoradio no se le puede convertir a android y que no es modelo S100 ni S150.

      En cuanto a la version de Windows CE que trae instalada sabes si hay alguna manera de saber que version tiene instalado?

      Gracias por contestar y dedicarme parte de tu tiempo.

      Delete
  36. Hello,

    Could anyone confirm that converting S150 on android 4.03 and latest fw to WinCE is non-destructive for this head unit? I saw comments that black screen is a result and the unit is lost. Any solution or idea how to force to convert to WinCE?

    mikrus10

    ReplyDelete
    Replies
    1. If you are running latest 4.03 firmware you will not be able to switch to wince.
      SDBOOT work only with andfroid firmwares not newer than July 2014

      Delete
    2. Hola,

      Is there any other program like SDBOOT which will work? Is there the possibility for a firmware repair if the android 4.03 is faulty?

      Delete
  37. I have been advised that the only solution to convert s150 into s100 is to replace motherboard (mainboard). If anyone is able to share with supplier name/link and any howto instruction I would be appreciated. thx mikrus10

    ReplyDelete
  38. Hello KoTix first congratulate you on your contributions. You wont my question if you can help me, I have a S100 model C305 and S150 want to make it, but I find your link to your site which explained. (Http://kotixworld.blogspot.com.es/2014/01/ s100-to-s150-conversion-convert-wince.html) have firmware version I305, but I understand that before I make the conversion process WinCE Android. Is there a tutorial or link where you can study? Thank You.

    ReplyDelete
    Replies
    1. I have removed the link for many reasons:
      - firstly i'm selling software for wince now so it's not good for my business.
      - second, if you are running latest wince firmware you cannot upgrade to android anyway because roadnav have blocked the bootloader
      - third, you will not be able to switch back to wince.

      Delete
    2. Thanks for the Kotix response, the version I'm using is:
      bsp: S100-UNI.A20140106-A2.1
      App: S100-APP-V1.3.9.1
      MCU: F00M S00E C305

      With these data could happen to Android device? I have a converter Android another model C026 and an Android firmware for my model (I305). Could you change WinCE Android and then update the firmware to become the I305 model?

      Thank you very much.

      Greetings.

      Delete
    3. Antonio habla en espanol que te entiendo mejor

      Delete
  39. Gracias por la respuesta Kotix, la versión que estoy usando es:
    bsp: S100-UNI.A20140106-A2.1
    Aplicación: S100-APP-V1.3.9.1
    MCU: F00M S00E C305

    Con estos datos puedo convertir el dispositivo a Android? Tengo un convertidor Android de otro modelo (C026) y un firmware Android para mi modelo (I305). ¿Podría cambiar WinCE a Android y luego actualizar el firmware para convertirlo a mi modelo I305?

    Muchas gracias.

    Saludos.

    ReplyDelete
    Replies
    1. Si creo que puede convertirlo ad android sin problema.

      Delete
    2. Gracias Kotix, entonces no tendré problemas por convertir de WinCe a Android con otro modelo diferente al mio y luego actualizar con el firmware S150 de mi modelo I305?

      Gracias!!!

      Delete
  40. Ah, se me olvidaba, los firmwares los he descargado de RoadNav.com, tienen el idioma español integrado?

    ReplyDelete
    Replies
    1. No espera tu tiene que convertir el tu modelo con el equivalente de android y no con otro modelo. Es peligroso utilizar otra mcu diferente de la tua.
      los linguaje son todos entro.

      Delete
    2. Y es posible montarme yo el equivalente con los ficheros de mi modelo 305? Yo he conseguido la conversión a partir de este foro: http://www.clubmitsubishiasx.com/bricos/3689-convertir-s100-wince-s150-android.html pero claro no dispongo de los datos de los ficheros que necesito para montarme la conversión a mi modelo. Si me pudieras orientar de como hacerlo te lo agradeceria. Mil gracias!!

      Delete
  41. Hi Ko Tix,

    I have the model i071 for Toyota Celica with the original firmware 2.3.4 android.
    I am trying to upgrade it to android 4 and I cant find the correct version and the relevant instructions.
    So I would very appreciated if you had the kindness to help me.

    Thank you in advance.

    ReplyDelete
    Replies
    1. I send you a message trought hangouts, if you can'y read it please send me an email.

      Delete
  42. Saw a post about MyDean in this thread and have seen that MyDean skin is a little fancier, and would like to update to MyDean.
    But it does not seem possible.
    Is there any difference in hardware between Winca S100 and S100 My Dean?

    ReplyDelete
    Replies
    1. No differences, if you have the mydean firmware for your model you can flash it safely.
      Btw, i just want to let you know that I'll port the mydean skin to s100 in the next weeks

      Delete
    2. Fine.
      Then I can wait until you've fixed it.

      You are king at making new skin ... :)

      Delete
  43. Stupid question: how can I fix my S100 wince unit (which now only shows a white screen) if I accidentally pressed the "MCU" button on that screen during setup?

    ReplyDelete
  44. You can try the sdboot method described here but before flashing you should set to "False" the touchscreen calibration editing the file update.xml in your firmware.

    ReplyDelete
    Replies
    1. Thanks for the fast response!
      Yes, I thought about that, and did it... I figured that since the touch is not responsive, the update could hang waiting for some input for the calibration...
      But even so, it did not work (at least not after 10 minutes - would it need more time? ). Other things I could try? Or... what precisely happened when I pressed the MCU button? If it matters, the MCU version listed in the firmware was not EXACTLY the same as the mcu version in the device (both were C017, but the one in the device started with P0NN S00 blah blah and the one in the fw started with something else, even though both ended in C017).

      Delete
    2. it probably happened that the cpu has been erased but not written and if it's that you can only replace the cpu board.
      Anyway with a touch calibration off you should wait 20 minutes to be safe, 10 minutes are not enough

      Delete
    3. Thank a lot man. I really appreciate it. I'll give it another try and see how that goes. All the best!

      Delete
    4. Just came back from the car. No luck after almost 30 minutes. Last time when I reflashed it did some beeps etc, but now... nothing. I guess I'll have to buy a new "display" board...

      Delete
    5. This would be the one? (sorry for all the questions :D ): http://www.roadnavi.com/product/rn-s100-s150-display-pcb-board/

      Delete
    6. Yes it is, just request it for your model so it will come with firmware preloaded.

      Delete
    7. Thank you so much man. You helped me more than all those... whatever... "professionals" :) I'll fix it somehow and I'll be back here for some.. improvements :D Thanks again.

      Delete
    8. This comment has been removed by the author.

      Delete
    9. I just got a new display board. White screen still there. Looks like nobody on Earth knows what happens if you tap that MCU button during update.. oh well..

      Delete
    10. Oh my god... i don't know what to say...
      Are you sure that the lcd flat cable isn't broken?

      Delete
  45. This comment has been removed by the author.

    ReplyDelete
  46. Hi, i try to create the SDBOOT card, but when i execute the sdboot.exe they shows an error message "can't read MBR sector from drive". Do you have any solution for these?

    ReplyDelete
  47. Hola, estoy siguiendo los pasos para crear la tarjeta sd. Luego de realizar los procedimientos con el sdboot.exe, efectivamente aparece el mensaje "fusing image done". Hasta ahí todo ben. Pero al retirar la tarjeta de manera segura y volverla a insertar, en vez de pedirme que le haga un formateo, aparece el mensaje " inserte un disco en Disco Extraible (E:)". Y no la puedo formatear. Cuál puede ser el problema?

    ReplyDelete
    Replies
    1. Toma el software minitool partition wizard y controla que las particiones están bien.
      Una de 100 mb y una otra para el fat 32 de el tamaño de la sd.
      Para estar seguro puede borrarlas todas y re-empiezar con sdboot.

      Delete
    2. Bien, con el partition wizard puedo ver que está dividida la sd en dos partes, una 100 megas y la otra para el resto. Ambas dicen "sin asignar". Qué hago? formateo la mayor y dejo la de 100 megas tal como está?

      Delete
    3. Si, formata la mayor en fat32 con nombre "SDBOOT" y no cambia la 100mb.

      Delete
    4. OK gracias. A probar se ha dicho!

      Delete
  48. Hello, my cardvd with with Wince 6.0 don't start with SDBOOT and don't load my wirmware S100 C150 (ford focus 2012). Cardvd don''t start to OS.(((

    ReplyDelete
  49. Hello, do you have sdboot for dvd's which made after NOVEMBER 2014? this sdboot can not help. Thanks for reply

    ReplyDelete
  50. Hola KoTiX.

    Antes de nada queria darte las gracias por tu trabajo y ayuda a la comunidad, así que GRACIAS!! Ahora te explico mi problema.

    Tengo un S100 modelo C278 y lo estoy intentando convertir en un S150 gracias a tu firmware. He creado un firmware especifico para mi modelo modificando los archivos; ADSet.xml, WheelValue.xml y personize.prop con la config que trae mi firmware original Wince. Despues he creado una tarjeta booteable con la ayuda de SDBOOT.exe, he copiado la carpeta Wince en la raiz de la SD y todo el contenido de la carpeta Wince tambien lo he copiado en la raiz de la SD, creo que hasta ahi todo esta correcto.
    El problema surje cuando inserto la SD en la ranura GPS y enciendo el dispositivo, primero hace un pitido (como siempre) Despues uno mas largo y luego la pantalla se ilumina y se va apagando hasta quedarse totalmente en negro con una linea horizontal, al tocar los botones pita y de vez en cuando se vuelve a iluminar la pantalla para volverse a quedar en negro, de ahí no pasa. Al reiniciarlo funciona sin ploblemas, Wince claro.

    Te mando link de una foto de información de sistema; http://i1315.photobucket.com/albums/t581/_BoMbErO_MYSTIC_/DSC_0362_zpsvcdcyneo.jpg

    No se que punto estoy haciendo mal, a lo mejor simplemente no se puede hacer??

    Un saludo y gracias otra vez.

    ReplyDelete
    Replies
    1. SDBOOT no es para convertir wince en android, es al contrario para convertir android en wince!
      Cotactame para email porfavor.

      Ciao :)

      Delete
  51. Ho aggiornato la mia s100 c306 (seat leon fr 2014) con il nuovo firmware che ho trovato qui http://www.roadnav.com/forum/firmware-aa/s100-wince/4710-rn-s100-wince-firmware-update?p=18624#post18624 la cui versione è che ho installato è questa

    Date: May 28, 2015
    File Name: C306-V1.10.9.0.exe 74.4 MB total
    Download link: http://we.tl/4G5U34TDDq
    RN model: C306
    OS: S100-UNI.A20140721-A2.2
    APP: S100-V1.10.9.0
    MCU: G00P S00I

    solo che ora ho un problema che non so se è dovuto al firmware o è capitato per caso proprio ora, quando avvio il navigatore sia il sygic oppure igoprimo il gps ci impiega tantissimo ad agganciare i satelliti e quando li aggangia mi da una posizione diversa da dove mi trovo realmente, dopo un bel po si stabilizza ma ogni tanto impazzisce e mi da una poszione diversa da quella di dove mi trovo, anche i punti di interesse me li segnala in maniera errata. Come posso risolvere? Può essere solo un problema di antenna? Se fosse l'antenna gps a posto di usare quella che era in dotazione con l'autoradio posso usare quella originale dell'auto? Avrei voluto anche provare ad installargli il sistema android ma non ho trovato in rete nessun firmware e nessuna guida dettagliata per il mio modello s100 c306 montata su una seat leon fr del 2104, qualcuno può aiutami in qualche maniera? Grazie.

    ReplyDelete
    Replies
    1. Ciao, prima di cambiare antenna puoi provare a mettere l'altro firmware 1.8.9: http://we.tl/Hbucusksgl e vedi come va
      Android lascia perdere se non vuoi spendere soldi per niente e rischiare di rovinare la radio. Se proprio vuoi provare manadami un email che ti spiego.

      Ciao ;)

      Delete
    2. Ho provato ma il problema persiste. Per quanto riguarda Android volevo provare perché ho problemi con il navigatore in quanto il sygic ha le mappe un po vecchie, mentre igoprimo ho cercato varie guide in rete ma caricandogli e poi personalizzati come per esempio gli autovelox non mi sembra che meli segni tutti come fa il sygic eppure i poi li prendo sempre da poigps.com, poi su igoprimo non riesco a capire perché se sono in autostrada mi vede la mappa troppo ampia, a me piace che si veda sempre in primo piano, per cui con Android avrei provato a mettere il TomTom per vedere se andava meglio. Tra l'altro con questa autoradio ho un altro problema, durante la navigazione quando il navigatore parla mi abbassa il volume audio che sto ascoltando e poi non si alza più, funziona meglio solo se durante l'uso del navigatore ascolto la musica da dvd perché se ascolto musica da microsd o da usb fa questo difetto.

      Delete
    3. TomTom su queste radio non funziona e la gestione delle altre applicazioni durante la navigazione è molto peggio che in wince.
      Se vuoi cmq provare e rischiare manami una e-mail all'indirizzo che trovi nel mio profilo sulla DX del blog. Ciao.

      Delete
    4. Per il resto che ho scritto mantenendo wince l'unica soluzione e provare a cambiare antenna visto che rimettendo l'altro firmware continuo ad avere problemi? Grazie.

      Delete
  52. hola quisiera saber si existe la version android para mi c207 si alguien sabe y me ayuda este es mi correo nanofgg@gmail.com

    ReplyDelete
  53. This comment has been removed by the author.

    ReplyDelete
  54. Hi KoTiX, i have a Skypine 2 din chinese with a wince 6 operating system , i want to convert it to Android system, current system is OS:Version_AT551_00_2014_09_19(CS4344)
    APP:05_0303_01_2014-11-27
    I appreciate if u can help me in this regard

    thank u

    ReplyDelete
    Replies
    1. This is not a roadnav s100 unit, so you cannot convert it to android.

      Bye ;)

      Delete
  55. Tengo un problema las luces del estereo la camara de reversa y el comando satelital demora alrededor de veinte minutos en prender. Pongo el auto en marcha y hasta q no prenden las luces del estreo no funcionan

    ReplyDelete
  56. Mi auto es un 207 app: s100-v1.10.9.0p oem info: A002

    ReplyDelete
  57. Visto che continuo ad avere problemi con il gps dopo l'ultimo aggiornamento e non so se sia dovuto a quello in quanto ho provato a riflashare il firmware di febbraio 2015 ma sembra che abbia sempre problemi, spesso ci impiega una vita ad agganciare i satelliti, quando li aggancia spesso mi segna come che sono nella corsia opposta oppure in senso di marcia contraria...volevo chiedere se provo a rimettere il firmware di febbraio 2015 usando SDBOOT_wince potrò magari risolvere? Esiste magari da qualche parte il firmware originale che avevo quando l'ho acquistata e che dovrebbe essere il firmware prima di febbraio 2015? Volevo anche acquistare una sky e ho visto ieri nel post del 15 luglio che c'è una con scritto "MYDEAN" come posso acquistarla e quanto costa? Oppure se esiste un pacchetto sky con inclusa la "MYDEAN". Grazie

    ReplyDelete
    Replies
    1. Il fatto che usi o meno sdboot non cambia nulla, é il fw che fa la differenza.
      La skin mydean esce la prossima settimana e ci saranno le spiegazioni su come acquistarla.
      Ciao.

      Delete
  58. Hola KotiX, tengo un problema con mi radio s100, no puede leer tarjeta sd para reproducir música, vídeo , etc y tampoco para GPS y me sale este mensaje (application platform exe encountered a serious error and must shut down) que puedo hacer para solucionar este problema?? Saludos.

    ReplyDelete
    Replies
    1. La unica solución para el problema de platform.exe es flashar el firmware, pero si no puede leerlo puede solo cambiar la placa cpu o el lector de tarjeta.

      Delete
  59. buenas mi problema esque tengo una radio s100 para hyundai i30 la c156 y quiero reistalar el sistema operativo de nuevo ya que el apartado de audio a dejado de valerme sin mas se me queda la pantalla en negro cuando le doy a adio,todo y no me coje los cd tampoco todo lo demas funciona bien,me podeis ayudar a reistalar el windows ce? gracias

    ReplyDelete
    Replies
    1. roadnav.com puede buscar el firmware y las informaciones

      Delete
  60. hola tengo un s100 y se me ha quedado bloqueado con el mensaje application platform.exe encountered a serius error and must shut down, y no me deja acceder a el de ningún modo he probado meterle un mouse por el usb trasero y nada no hay forma. alguien me puede ayudar

    ReplyDelete
  61. ciao Kotix ho uno stereo 2din cinese s100 c-043 con win ce ...volevo sapere se e' possibile caricargli android e se si quale fw dovrei usare?
    grazie
    saluti

    ReplyDelete
    Replies
    1. Si è possibile, per maggiori info contattami per email. La trovi nel mio profilo sulla destra di questo blog.
      Ciao :)

      Delete
  62. Kotix, tengo un s100 y se me ha quedado bloqueado con el mensaje "application platform.exe encountered a serius error and must shut down". He intentado reinstalar el firmware sin embargo no logro hacer que inicie el proceso, ya intente con varias SD, use el SDBOOT, ya no se que mas hacer....Si tienes alguna idea te agradezco.

    Saludos

    ReplyDelete
  63. Hi KoTiX. My S150 is Build number IML74K-20140822. I tried converting to the latest S100 for my model (I008 to C008) using your instructions, but I only got "black screen", with no visible activity after inserting the BOOTSD and powering on my unit. After several more attempts I gave up and removed the BOOTSD. My unit can still power on to Android, but I would definitely like to convert to WinCE. You mentioned earlier in the thread that you may have another bootloader that might work with S150 firmware after 06/06. Any chance you can share that with me? Thanks.

    ReplyDelete
    Replies
    1. No, there is only one wince bootloader for sdboot. The only way I found to switch to wince is to flash an older android firmware first ( like 06/06) and then use sdboot.
      So downgrade first to an older fw then convert to wince.

      Delete
    2. Thank you very much for the expeditious reply. Will try that out.

      Delete
  64. Hi
    I have try too much to back to winca but when i put the Sdcard its coming black display and its nothing happend ... can u help me ?
    And how i know my winca model ?

    ReplyDelete
    Replies
    1. If you are on one of latest android firmwares you cannot go back to wince.
      You could try to dowgrade to an earlier android firmware like 06/06/2014 and than use sdboot to convert to wince, but it seem to don't work for everybody.

      Anyway i'm almost ready to release a new android rom. Contact me by email if you are interested.

      Delete
  65. Hi Kotix, Is there any latest release Android firmware for S100? I did the upgrade more than a year and i believe there should be new version of it. Furthermore there some issue with tv channel, as i could not switch to other channel, i tried but it seems on channel it shows only one channel. Probably i need to reimage it again. What is your thoughts? Can you please share with image files and exact procedure of it as i did it long time ago. Many thanks.

    ReplyDelete
    Replies
    1. I made a new android firmware that is still under development but I don't give it for free, I sell it.
      For more informations please contact me by e-mail.

      Delete
  66. Hi KoTiX,
    I upgraded my S100 with following version of the software, dedicated to my Mazda CX-7:
    APP: S100-V1.10.9.0
    MCU: G00P S00I
    (www.roadnav.com/forum/firmware-aa/s100-wince/4710-rn-s100-wince-firmware-update?q=C097)
    Before I hadŁ
    APP: S100-V1.1.10.0
    MCU: F00Q SOOI

    After the update, my device does not turn on at all... What's more, during the last step of the update (the white screen with progress bar), under "Mission accomplished" sentence I got something like "Do you want to piss me off?".

    The other symptoms are:
    - device does not turn on at all
    - SRC button is on even if I turn of the ignition
    - the display of car computer displays 'NAVI SYSTEM"
    - I cannot eject the CD - eject button does not work

    I tried to use SDBOOT with proper version (previous) of the software, but no effect. I also tried to push the small reset button above the eject button, but the display only blinks shortly and nothing happens.

    Please advise.

    ReplyDelete
    Replies
    1. The unit is almost dead but you can:
      1. hold src and reset for 10 seconds to hard reset.
      2. Try to hold the eject button during power on
      3. press repeatly the reset button during power on

      If you use sdboot, be sure you edit the update.xml and set to "false" the touch screen calibration, and let the flash run for 25 minutes even if you don't see nothing (blind flash).

      Good luck. ;)

      Delete
    2. I tried all three, but unfortunately they were unsuccessful...
      I also remembered to set "false" to touch screen calibration during SDBOOT, but also no effect.

      Could you please tell me why the unit is dead and what could lead to it?
      Also please advise if I can fix it somehow by replacing some of its parts.

      Thanks for quick feedback!

      Delete
    3. I beleive the mcu flashing was bad or you flashed a wrong file... Anyway, now it's bricked and you can only replace the CPU board.
      You can buy it from RN_Tao on roadnavi.com.
      Ciao ;)

      Delete
    4. Thank you for your help - I just ordered new main board.
      Hopefully, replacing it will do the trick ;)
      Have a good one!

      Delete
  67. Ciao KoTIX, ho due problemi: il primo è che da qualche giorno l'audio degli MP3 e delle APP in generale non va più o meglio 1 volta va e 9 no (coincidenza ho visto che anche la retro cam fa questo scherzo); il suono da radio e CD invece funzionano bene; il secondo problema è che non riesco ad aggiornare il fw della mia unità (S-150 versione I157 con MCU 0004 per Renault / Dacia Duster) in quanto pur mettendo la SD nel vano GPS e riavviando l'unità oppure emettendola nell'altro vano SD e lanciando "System Upgrade", il device si riavvia ma senza lanciare la procedura di aggiornamento. Avevo letto qualcosa qui sul tuo forum ma non trovo più alcun riferimento su come risolvere il problema. Puoi darmi una mano per i problemi esposti ? Grazie. Maurizio
    NB: se volessi installare il tuo FW quale procedura dovrei seguire ? Hai una pagina del forum dove si descrive l'installazione dell'attuale versione del tuo fw ?

    ReplyDelete
    Replies
    1. Ciao Maurizio, I'll tuo é in problems hardware molto commune che si puo sistemare risaldando la scheda cpu.
      La procedura è descritta sul forum roadnav. Per la mia ROM mandami una e-mail.
      Ciao.

      Delete
  68. Hi KoTix,
    I have S100-UNI.A20140721-A2.2; APP: S100-V1.3.9.0; MCU: N0NM S00E C241.I try with 3G dongle Huawei S173s-2. The system recognized it and make 3G connection, 3G icon present on the screen, but when I start the browser Opera mini and try for example with www.gogle.com or other, then massage is: Review yor internet sttings. The internet settings on the dongle are correct, because on the laptop dongle working without no problem. I think that on my system missing driver for that dongle. Is that so? If you can help me please do it! And what firmware I can use to update my system with more new firnware? Thanks before hand!

    ReplyDelete
    Replies
    1. Hi KoTix,
      Is there newer firmware than S100-UNI.A20140721-A2.2;APP:S100-V1.3.9.0; MCU N0NM S00E C241, model from witson site is W2-C241?

      Delete
    2. go to www.roadnav.com to find the firmware for your model.
      Look on xda wiki about the compatible 3G dongles.

      Delete
  69. Kotix Hello, I have a problem with my current equipment (S100 C023, KIA Sportage), no lights and beep sounds, ignoring the pressure of the buttons.

    It is possible to reinstall the software to correct this error?

    Where I can get the updated software?

    ReplyDelete
  70. Hello KoTix. I´m jasafello from roadnav forum. I'm trying to update my S100 C012 again to this firmware.
    OS: S100-UNI.A20140721-A2.2
    APP: S100-V1.10.9.0
    MCU: G00P S00I
    It is valid for your skins ??
    The patch I have to be applied before or after installation?

    Regards

    ReplyDelete
    Replies
    1. Hi, apply the patch before flashing the fw.
      Yes my skins work perfectly on your system.

      Delete
    2. I tried to install. But in the screen appears "illegal upgrade".
      I installed an older version 1.8.9.18. But I have the same problem as last time.
      When I push the buttons on the wheel, it jumps 2 songs or 2 radio stations. I change it at low impedance at settings, but does the same. I can't patch, appears a message " this patch is forbidden in this software".
      I don´t know to do. I like your skins but if the S100 doesn't work correctly with the original firmware.....
      Have you any idea? I only have one, downgrade to a stable firmware.
      Regards

      Delete
  71. Hello KoTiX. It's possible to send me a SD card to recover my s100 unit after a bad fw flash?. I have a S100 model C150 with this FW:

    File Name: C150-V1.10.9.0.exe 74.5 MB total
    Download link: http://we.tl/48xesq8VdV
    RN model: C150
    OS: S100-UNI.A20140721-A2.2
    APP: S100-V1.10.9.0
    MCU: G00P S00I


    How much would it cost?

    Thanks!!!

    ReplyDelete
    Replies
    1. Please contact me by email so we can talk about it.
      Tnx ;)

      Delete
  72. Hi, I own an S100 C096 for Mercedes SLK R171. I would like to know if and how I could update to "MyDean" skin. If poosible I would like also the purchasing link. Thanks!

    ReplyDelete
    Replies
    1. Buy the skin6 from this blog or from my site: www.navimods.tk

      Delete
  73. Hi KoTiX
    everytime i try to do the SDCard it showes "Can not write Image file on SD Card"
    had this before and somehow it worked but i do not know why
    any ideas !?

    Mike

    ReplyDelete
  74. Hello

    i have chinese os: version_AT551_00_2013_04_01 and i need update software how i can update this

    thank you

    ReplyDelete
  75. Hi,

    I downloaded my firmware for my C072 from Roadnav.com, but I cannot
    find the folder "BTUpdate". Is this a problem?

    Best regads,
    Sebastian

    ReplyDelete
  76. Hi,

    I downloaded my firmware for my C072 from Roadnav.com, but I cannot
    find the folder "BTUpdate". Is this a problem?

    Best regads,
    Sebastian

    ReplyDelete
    Replies
    1. No, btupdate folder is not needed anymore.

      Delete
  77. Hi Kotix, my S100 with WinCE is not booting correct. Only my radio makes some sound but cannot switch to other Devices and it show the logo of the car.

    I tried the Boot sd but only black and white screen. Due to no src button i dont know how I can make a hrd reset.

    Do you have some tipps?

    ReplyDelete
    Replies
    1. You just need to flash the firmware to recover your unit. Go to www.roadnav.com to find the fw for your model.

      Delete
    2. I load the same fw again and build a sd reboot recovery but does nit work. Or should i do without sd recovery? But i cannot select the correct path in advance.

      Delete
    3. Do it without sdboot, just edit update.xml and chance to false the touch calibration.

      Delete
  78. Ok. I did not know that this way also works. I always thougt taht I have to do this before: Setup the GPS path: \patch\UpgradePatch.exe? But this is not neccessary, isn't it?

    ReplyDelete
    Replies
    1. Nope, that is not necessary

      Delete
    2. When I do this the screen is black with some lines and often hmthe screen switch the colores. Is there a blind patch starting. Can I check if everthing went well? I set the calibration from true to false. Thank for all your help.

      Delete
    3. Once you power on the unit to start the flash procedure, let it run even if you don't see nothing for 20 minutes.

      Delete
    4. I do it and wait 30 minutes, then I put out the sd card but nothing happen. Which fw should I use for this restart? Have I to use the same or can I use a older one?

      Delete
    5. It doesn't matter the Fw versione you use.
      Try with different sdcards but if you cannot solve in this way or with sdboot then you need to resolder the CPU board or buy a new one.

      Delete
  79. che qualcuno che mi po aiutare grazie

    ReplyDelete
  80. KoTix, muy buenas tardes veo que entiendes bien el español,

    Te comento que actualice mi S100 a S150 la versión de S100 que tengo es C056, sin embargo ahora no me funcionan los controles del volanti ni los del estéreo correctamente, ejemplo el botón SRC hace mute y apaga el estéreo.

    El Boton MODE del volante sube el volumen, me gusto la versión del S150 pero sin lograr manejar los controles correctos pienso en regresar a S100 de Win CE el problema es que cuando trato de cargar el SDBOOT me envía error Can´t Read MBR sector from Drive!, ya he fomrmatando la tarjeta como lo indica el documento adjunto y en tu foro y no logro cargar el archivo imagen.

    Por favor ayudame

    ReplyDelete
    Replies
    1. Por el error de MBR tiene solo que empezar el sdboot como administrador.
      Pero si quiere volver a wince depende mucho da que versión de firmware android tiene ahora.
      Contactame por email por favor. ;)

      Delete
  81. Replies
    1. Solo Paypal desde mi sito : www.navimods.tk

      Delete
  82. Hi,
    I have c145 unit, I flashed it to restore wince but some program does not work, like media player, navige, also language is in czech and I have no setting tab to change it.
    Thanks for replying.

    ReplyDelete
  83. preciso com urgencia uma ajuda. preciso da firmwarwe s100 ( RN modelo: C239
    OS: S100-UNI.A20140721-V2.2
    APP: S100-V1.2.11.0
    MCU: Q00Q S00I C239 )... alguem possa me ajudar e urgente.

    ReplyDelete
  84. rgently need help. I need firmwarwe s100 (RN Model: C239
    OS: S100-UNI.A20140721-V2.2
    APP: S100-V1.2.11.0
    MCU: Q00Q S00I C239) ... someone can help me urgently.

    ReplyDelete
  85. rgently need help. I need firmwarwe s100 (RN Model: C239
    OS: S100-UNI.A20140721-V2.2
    APP: S100-V1.2.11.0
    MCU: Q00Q S00I C239) ... someone can help me urgently.

    ReplyDelete
  86. http://we.tl/bD0Dv5DqIchttp://we.tl/bD0Dv5DqIc
    to this link oconsegui not download without the password.

    ReplyDelete
  87. Hola KOTIX gracias por este gran blog que sirve de mucha ayuda, tengo un problema con mi s100 c009 opel zafira b, despues de 3 años funcionando ahora sin mas empezo a ponerse la pantalla en negro y aparecian unas lineas de colores en el lateral de la pantalla, pero reiniciaba y volvia a funcionar, ahora llevo casi un mes que no vuelve a funcionar, pantalla negra con las rayas, decir que cuando conecto marcha atras la imagen funciona perfectamente y el sonido de radio y disco tambien, incluso los mandos del volante, y me da mucha rabia tener que cambiar de radio porque me encanta el funcionamiento y todo sobre esta radio, me gustaria saber alguna solucion a este problema, decir tambien que unas de las veces que volvio a funcionar le reinstale el firmware por si tenia un error pero al poco tiempo volvio con el fallo, gracias por todo, Fran

    ReplyDelete
  88. Hola KOTIX gracias por este gran blog que sirve de mucha ayuda, tengo un problema con mi s100 c009 opel zafira b, despues de 3 años funcionando ahora sin mas empezo a ponerse la pantalla en negro y aparecian unas lineas de colores en el lateral de la pantalla, pero reiniciaba y volvia a funcionar, ahora llevo casi un mes que no vuelve a funcionar, pantalla negra con las rayas, decir que cuando conecto marcha atras la imagen funciona perfectamente y el sonido de radio y disco tambien, incluso los mandos del volante, y me da mucha rabia tener que cambiar de radio porque me encanta el funcionamiento y todo sobre esta radio, me gustaria saber alguna solucion a este problema, decir tambien que unas de las veces que volvio a funcionar le reinstale el firmware por si tenia un error pero al poco tiempo volvio con el fallo, gracias por todo, Fran

    ReplyDelete
    Replies
    1. Hola, es un problema hardware y tiene que probar a hacer esta procedura:
      https://www.roadnav.com/forum/knowledgebase/35698-soldering-roadnav-s100-s150-core-box

      si no soluciona con esto, tiene que comprar una placa nueva de aqui:
      http://www.roadnavi.com/product/display-board-s100-s150-s160/

      Delete